The Euroslider package makes it possible to utilise the depth of the motorhome's double floor without making equipment at the back difficult to reach.

Instead of reaching into a long, narrow compartment or pulling out boxes one by one, you pull the entire storage solution all the way out to you.

The package comes complete with Euroslider V2, 12 cm-high Euroboxes and dedicated floor and ceiling anchoring developed for installation in double floors.

The system was originally developed based on the Carthago C and E series, but it also fits many other motorhomes with similar double floors and available dimensions.

Make the entire double floor accessible

The double floor provides plenty of valuable storage space, but its depth often makes the area at the back difficult to use.

With full extension, the entire Euroslider comes out of the compartment. This gives you a good overview and easy access to the Euroboxes without having to crawl, stretch or move other things first.

This means more of the space can actually be used for organised and easily accessible storage.

Easy one-handed operation

Euroslider V2 has a practical one-grip handle that allows the entire drawer to be easily pulled out and pushed in with one hand.

This is especially practical when you already have something in your other hand – pull out the Euroslider, take the box you need and slide the system back into place.

Three sizes – complete with Euroboxes

The package is available in 30 × 120 cm, 40 × 120 cm and 60 × 120 cm.

All three variants use 120 cm telescopic rails and can withstand a maximum evenly distributed load of 50 kg.

The construction is mainly made of aluminium, keeping its own weight low while providing the system with ample capacity for equipment and storage.

30 × 120 cm

The package contains:

• 1 Euroslider V2 measuring 30 × 120 cm

• 3 Euroboxes measuring 30 × 40 × 12 cm

• Vertical aluminium rails for floor and ceiling anchoring

• Floor and ceiling mounts

• Necessary mounting components

The total required width is 36 cm at the front and 37.5 cm at the rear.

40 × 120 cm

The package contains:

• 1 Euroslider V2 measuring 40 × 120 cm

• 2 Euroboxes measuring 30 × 40 × 12 cm

• 1 Eurobox measuring 40 × 60 × 12 cm

• Vertical aluminium rails for floor and ceiling anchoring

• Floor and ceiling mounts

• Necessary mounting components

The total required width is 46 cm at the front and 47.5 cm at the rear.

60 × 120 cm

The package contains:

• 1 Euroslider V2 measuring 60 × 120 cm

• 2 Euroboxes measuring 40 × 60 × 12 cm

• 2 Euroboxes measuring 30 × 40 × 12 cm

• Vertical aluminium rails for floor and ceiling anchoring

• Floor and ceiling mounts

• Necessary mounting components

The total required width is 66 cm at the front and 67.5 cm at the rear.

Adapted to low double floors

This package uses a dedicated mounting solution specially developed for double floors.

The floor mount has a fixed height, while the ceiling mounting point can be height-adjusted. The system can therefore be adapted to a distance of 16–23.5 cm between the floor and ceiling in the double floor.

The included Euroboxes are only 12 cm high, allowing the limited height to be used efficiently.

Anchored between floor and ceiling

The vertical aluminium rails are mounted at the rear of the system and anchored between the floor and ceiling in the double floor.

This provides a stable construction and helps distribute the load between the floor and ceiling mounting points.

The vertical rails can be cut if necessary to adapt the solution to the height of the vehicle in question.

Actual space requirements

The aluminium frame is 120 cm deep, while the single-handle grip and front sections add another 4 cm. The total required depth is therefore 124 cm.

The required width depends on the selected variant and is specified under each size above.

We recommend leaving a little extra clearance around the system so that the pull-out can move freely without the handle, boxes, or other components rubbing against the opening or interior.

Developed for Carthago - also fits many other motorhomes

The solution was originally developed based on the double floor in the Carthago C and E series.

However, it is not limited to Carthago and may fit many other motorhomes with a similar double floor and suitable mounting options.

The most important factors are the available width, depth, height, and mounting points.

There may be differences between motorhome models, model years, and individual interiors. Therefore, check the available space before ordering.

Complete solution - ready to organise

Here, you avoid assembling the pull-out system, boxes, and double-floor mounts as separate products.

The package contains Euroslider V2, Euroboxes adapted to the selected size, and the mounting system required for the double floor.

The result is not just tidier storage - you make the entire depth of the double floor much easier to use.

Included

• 1 Euroslider V2 in the selected size

• 12 cm-high Euroboxes adapted to the selected size

• Vertical aluminium rails

• Floor and ceiling mounts

• Necessary mounting components

If you want a pull-out system for standard floor or wall mounting, see Euroslider V2.

You will also find our Euroboxes separately.