Starflex Bike Holder makes it easy to get your bike in, positioned, and secured in the cargo area.

The bike stands with its wheels on the floor and is secured with the included strap around a suitable point, such as the frame, handlebar stem, or seat stay. The holder helps keep the bike stable during transport.

Easy loading and unloading - especially for heavy e-bikes

The bike does not need to be lifted into a separate wheel rail or positioned precisely in a specific track.

When loading, you can simply lift one wheel into the cargo area, roll the bike further in, and then lift in the other wheel. The bike can then be rolled forward to the Bike Holder.

This makes the solution especially practical for large and heavy e-bikes that may otherwise be difficult to lift.

Secure and release the bike in seconds

The telescopic length and position of the Bike Holder are normally adjusted only the first time the setup is installed.

After that, you only need to fasten or release the strap when loading or unloading the bike. This allows the bike to be secured and released in just a few seconds.

One holder per bike

One Bike Holder is used for one bike. If you want space for more bikes, simply install several holders next to each other.

The system can therefore be adapted to anything from a single bike to a setup with several bikes.

The Bike Holder also works well for combinations of bikes and e-scooters, or for a setup with only e-scooters.

Can be used for more than bikes

The Bike Holder can also be used for:

• E-scooters

• Wheelchairs

• Golf bags

• Other larger equipment that can be secured with a strap

For a golf bag, a longer strap than the one included with the Bike Holder may be necessary in some cases.

Recommended installation with Bike Holder Rail

For regular storage of one or more bikes, we recommend installing the Bike Holders on the Starflex Bike Holder Rail.

The rail is installed between the Module Rails and makes it possible to adjust the Bike Holders continuously sideways. This makes it easy to adapt the distance between the holders to different bikes and setups.

If the bikes have suitable mounting points at different heights, the Bike Holder Rail can also be installed at an angle. This allows the Bike Holders to be offset both sideways and vertically.

This provides great flexibility when different bikes are positioned next to each other.

Bike Holder Rail is purchased separately.

Direct installation on the Module Rail

For lighter equipment, such as a lightweight bike, small e-scooter, or golf bag, the Bike Holder can also be installed directly in a Starflex Module Rail.

For direct installation, Hook Locks with screws are installed on the back of the Bike Holder so that it can be hooked directly into the Module Rail. The Module Rail must be sufficiently secured for the intended use.

For regular bike setups, and especially for larger or heavier bikes, the Bike Holder Rail must be used.

Extra stability for large e-bikes

The bike's weight rests on the floor, while the Bike Holder primarily stabilizes the bike and limits sideways movement.

For large and heavy e-bikes, we recommend in some cases using an additional Starflex strap around the brake lever so that the brake remains engaged. This prevents the bike from rolling and provides extra stability during transport.

Four telescopic lengths

The Bike Holder is available in four adjustable lengths:

• 15–25 cm

• 25–45 cm

• 45–75 cm

• 55–95 cm

Choose the length based on the distance between the mounting point and the bike or equipment to be secured.

Extra stability with Friction Buttons

For both direct installation in the Module Rail and installation on the Bike Holder Rail, we recommend Starflex Friction Buttons.

The Friction Buttons wedge the setup more firmly into place and provide extra friction, so that the holders and rail remain more securely in position and move less during transport.

Included

• 1 telescopic Bike Holder

• 1 strap for securing a bike or equipment