Product description

The vertical rail set for Euroslider is designed to build the Euroslider system upward and create multiple rows side by side. This enables maximum use of space in motorhomes, campervans, vans, and technical installations. The system makes it possible to build from 1 to 5 levels in a stable and professional structure. The rail set is compatible with all Starflex Euroslider models and provides a flexible, scalable solution. This product is an add-on system—Euroslider is sold separately.

The solution in practice

Vertical rails can be mounted directly to the side wall using the included wall brackets (0–35 cm adjustable distance from the side wall), or between the floor and ceiling for a self-supporting structure. The rail set is also used if the Euroslider needs to be raised over an edge or threshold, by raising the system to the desired height for unobstructed movement and proper operation. Euroslider frames can be mounted 6 mm above the floor (measured from the floor to the underside of the frame) or freely from 40 mm upward. Mounting between 6 mm and 40 mm is not possible due to the design and the space required for the sliding nuts. The height can be adjusted continuously within the rail system’s range.

Difference between the variants

All vertical rail sets, except the 115 cm version, are supplied with 2 sets of wall brackets (0–35 cm from the side wall). The 115 cm version is designed for installation between the floor and ceiling and is therefore supplied with 4 sets of ceiling mounts instead of wall brackets. This version is used when a fixed structure between the floor and ceiling is desired without lateral wall mounting.

Flexibility and expansion

The rails are designed so that multiple Euroslider systems can easily be built side by side. Different depths can be combined in the same setup, for example, 2 × 40×60 cm and 1 × 40×120 cm. When combining different depths, 2 sets of vertical rail sets must be used for proper stability. The vertical rails can also be replaced with Starflex modular rails if integration into the modular rail system is desired. A panel can be mounted on top of the system to create a stable surface by using ceiling and floor mounts for the modular rail.

What’s included

Standard vertical rail set:

• 4 vertical rails.
• 2 sets of wall brackets (0–35 cm).
• 4 floor mounts
• 4–20 sliding nuts for building levels.

115 cm vertical rail set:

• 4 vertical rails
• 4 ceiling mounts
• 4 floor mounts
• 20 sliding nuts for building levels.

(Euroslider set sold separately.)

Technical information

Modular vertical mounting system. Builds 1–6 levels. Continuously adjustable height. Adjustable wall mounting from 0–35 cm. 115 cm variant for floor-to-ceiling mounting. Floor mounting at 6 mm or from 40 mm and up. Compatible with all Starflex Euroslider models. Prepared for side-by-side mounting.