If the motorhome has a long overhang behind the rear wheels, even a relatively small difference in height can cause the rear end to come into contact with the ground.

Starflex Frame Roller is designed to reduce the risk of damage in such situations. If the motorhome scrapes the ground, for example when entering a steep driveway, passing over a ferry ramp or crossing another transition, Frame Roller provides a robust contact point at the rear of the chassis.

Extra protection with a long rear overhang

The greater the distance from the rear wheels to the end of the motorhome, the more easily the rear end can come close to the ground when the vehicle passes over a steep transition.

Frame Roller is particularly useful for, among other things:

• ferry ramps

• steep driveways

• ramps

• larger differences in height

• uneven surfaces

Frame Roller does not replace careful driving, of course, but it can reduce the risk of more vulnerable parts at the rear of the motorhome being the first to come into contact with the ground.

Solid construction

Frame Roller is made of strong aluminium and designed to withstand the load that may occur if the motorhome comes into contact with the ground.

This provides a robust solution without adding a large and heavy steel construction to the rear of the vehicle.

Easy installation using existing mounting points

Frame Roller is designed to be mounted on the vehicle's existing mounting points.

The original rear plate is removed, and Frame Roller is installed using the same bolts in the same bolt holes.

On vehicles with the correct AL-KO setup, you therefore do not need to drill new holes in the chassis.

Compatibility

Frame Roller fits Fiat with AL-KO chassis where the bolt spacing is:

123.2–124 cm

Check the bolt spacing and chassis on the vehicle before ordering.

Included

• 1 pc. Frame Roller AL-KO